1～12 件を表示 ／ 全 12 件
High-performance isotropic electric field probe
**Features** - High sensitivity - Isotropic & RMS measurement - Excellent attenuation - Compliance with international standards **Frequency Range** - [WPF3] 100KHz - 3GHz - [WPF6] 100KHz - 6GHz - [WPF8] 100KHz - 8GHz - [WPF18] 300KHz - 18GHz - NEW!! [WPF40] 20MHz - 40GHz **Sensor Type** Isotropic, RMS **Frequency Response Type** Flat
The corresponding frequency range is up to 40GHz! It is possible to identify the location of the electric field source.
The "HR-E 40-1 Set" is a product that includes the HR-E 40-1 electric field probe, which is a PCB emission near-field probe type. This probe enables electric field measurements of up to 40GHz. The probe head of the HR-E 40-1 can measure directly on individual conductor tracks, allowing for the identification of the location of electric field sources. 【Set Contents】 ■ HR-E 40-1: E-Field Probe up to 40GHz ■ CS-ESA: Viewer ChipScan-ESA Viewer Software/USB ■ HR-E char: Individual data for HR-E 40-1 ■ User Manual ■ Case *For more details, please download the PDF (English version) or feel free to contact us.
The probe includes a current attenuator and has a built-in 50Ω impedance matching network!
The "HR-E 40-1 Electric Field Probe" is a passive near-field probe that covers a frequency range of up to 40GHz. The probe head is isolated from the cable shield by a special attenuation system. Additionally, the probe includes a current attenuator and has a built-in 50Ω impedance matching network. 【Specifications】 ■ Type: Near-field Probe ■ Size: Chip-type (distance to internal electrode 0.5mm) ■ Supported Frequency Range: Up to 40GHz ■ Connector: 2.92mm female, Jack ■ Resolution: 0.2mm *For more details, please refer to the related links or feel free to contact us.
Rechargeable is already outdated! The 'Laser Power Supply Electric Field Probe' that doesn't require charging.
• Laser power supply – No charging required • Ultra-small size • High resolution, high speed, low noise • Frequency range: 10KHz-6GHz • Electric field strength 0.1V/m-10kV/m • Wide dynamic range • Continuous real-time data streaming • PC computer interface & software included
High-performance isotropic electric field probe capable of measuring up to 40GHz!
【Features】 - High dynamic range 60dB - Isotropic & effective value measurement - Excellent attenuation - International standard compliance
The corresponding frequency range is 30MHz to 1.5GHz/3GHz! PCB emission near-field probe type.
The "RF4-E Probe Set" includes two passive electric field probes that measure electric fields in the frequency range of 30MHz to 3GHz (1.5GHz) for comparative purposes. These probes are designed for analyzing electric field distribution, detecting coupling mechanisms on modules, and evaluating RF voltage in power systems at signal lead switching edges. Langer's near-field probes are compact and very easy to use, and they are electrically well-shielded due to the current-damping sheath. 【Set Contents】 ■RF-E 02: E-Field Probe 30MHz to 1.5GHz ■RF-E 05: E-Field Probe 30MHz to 3GHz ■SMB-BNC: 1m cable ■Case *For more details, please refer to the related links or feel free to contact us.
Functions well within a distance of 0.5 to 10 mm on the assembly! Same basic structure as the "XF-E 09s" probe.
The 『XF-E 04s』 electric field probe is a passive near-field probe. The lower electrode surface of the probe head is approximately 5x5mm, detecting separated electric fields on the surface of the IC. By placing and holding a small square electrode surface on components or printed circuit boards, it can detect sources of electrical interference. 【Specifications】 ■ Type: Near-field probe ■ Size: 5x5mm probe head ■ Frequency range: 30MHz to 6GHz ■ Connector: SMA female, Jack *For more details, please refer to the related links or feel free to contact us.
Bring the underside of the probe head close to the object being measured and detect the emitted electric field!
The "RF-E 02" electric field probe is a passive near-field probe. It detects separated electric field sources on bus structures, large components, or the surfaces of power supplies. The lower electrode surface of the probe head is approximately 2x5 cm and works well at a distance of 1 to 2 cm from the component. It has the same basic structure as the "RF-E 05" and "RF-E 10" probes. 【Specifications】 ■ Type: Near-field probe ■ Size: 23x53 mm probe head ■ Frequency range: 30 MHz to 1.5 GHz ■ Connector: SMB male, Jack *For more details, please refer to the related links or feel free to contact us.
It has the same basic structure as the "RF-E 02" and "RF-E 10" probes, but it detects electric fields in a very narrow range!
The RF-E 05 electric field probe is a passive near-field probe designed for use with scanners manufactured by Langer. The electrode width of the probe head is approximately 0.5mm, allowing for accurate identification of electric fields around clocked lines, IC pins, and small components. By placing and holding it on components or printed circuit boards, it can detect sources of RF electrical interference. 【Specifications】 ■ Type: Near-field probe ■ Size: 1x8mm probe head ■ Frequency range: 30MHz to 3GHz ■ Connector: SMB male, Jack ■ Resolution: 0.6mm *For more details, please refer to the related links or feel free to contact us.
Capable of measuring CW and pulse modulation with a single unit.
The new AR probe "FL8000 series" covers a frequency range of 5 kHz to 60 GHz and an electric field strength of 0.3 to 1000 V/m. It achieves a wide frequency range and dynamic range, simplifying your testing with just one device. By using a laser to supply power through fiber, continuous operation is possible without the need for battery recharging or replacement. *For more details, please refer to the PDF. Feel free to contact us as well.
Wide frequency band: 10Hz to 11GHz electric field probe
• Frequency range: 10KHz-11GHz • Laser power supply - no charging required • Extremely small size • High resolution, high speed, low noise • Electric field strength 0.1V/m-10kV/m • Wide dynamic range • Continuous real-time data streaming • PC computer interface & software included
High-performance high-frequency isotropic electric field probe capable of measuring up to 90GHz!
【Features】 - High sensitivity - Isotropic & effective value measurement - Excellent attenuation - Compliance with international standards
